All Hokie, All the Time. Period. Presented by

The Lounge Board

EDGEMAN

Joined: 01/05/2001 Posts: 124899
Likes: 40451


Follow up on rear suspension (picture)


The rear struts (shocks) are attached to the trailing arms by a nut/bolt, and attached to the frame by one nut on the top. You don't have to deal with the rear springs Basically you just have to remove two nuts, remove the shock, then reattach.

Once again, the only difficult part may be accessing the top nut, but it's probably not that difficult.

On the difficulty level, would put this in the same category as changing a wheel. Easy peazy.

(In response to this post by EDGEMAN)

Posted: 02/10/2017 at 12:48PM



+0

Insert a Link

Enter the title of the link here:


Enter the full web address of the link here -- include the "http://" part:


Current Thread:
 
  
BMW update . -- Will Stewart  02/10/2017 12:03PM
  On a car that old, that's a do-it-yourselfer. ** -- Will Stewart  02/10/2017 1:12PM
  The shifter surround is top-notch! ** -- PhotoHokieNC 02/10/2017 12:14PM
  Yeah, that was fun, difficult, and made a huge difference. ** -- Will Stewart  02/10/2017 12:17PM

Tech Sideline is Presented By:

Our Sponsors

vm307