All Hokie, All the Time. Period. Presented by

The Lounge Board

Joined: 01/05/2001 Posts: 124899
Likes: 40451

100000+ Posts

Subscriber

Board Member 20+ Years

10000 Likes

10000 Likes

10000 Likes

10000 Likes

250 Likes

100 Likes

100 Likes

What's this?

I just want to get in the ball park, and keep it there.

Except for the ball joint, all of the 17mm suspension bolts used the same torque value, which was less than the one 19mm bolt.

(In response to this post by HokieSignGuy)

Posted: 01/21/2020 at 08:27AM

+1

PREV NEXT REPLY

Insert a Link

Enter the title of the link here:

Enter the full web address of the link here -- include the "http://" part:

Current Thread:

Lets talk torque wrenches. Is it just better to buy a new one every... -- EDGEMAN 01/20/2020 9:14PM

Get the big one ** -- bigbadbird 01/21/2020 09:12AM

Woosh! Beyond me. ** -- 133743Hokie 01/21/2020 08:49AM

Gaskets & O-rings, Oh my! Buy a new one. ** -- thankbud 01/20/2020 10:13PM

^^^says the man from Morton-Thiokol^^^ ** -- PhotoHokieNC 01/21/2020 08:43AM

I think that's where I'm leaning... -- EDGEMAN 01/21/2020 08:14AM

You might want to ask Mona Lisa Vito ** -- Brown Water 01/20/2020 9:56PM

Hand tighten plus half turn ** -- Guy LeDouche 01/20/2020 9:48PM

Tighten until it starts getting loose again plus 90 degrees ** -- typed by ben 01/20/2020 10:15PM

I have a calibrated hand when it comes to "non-stressed" bolts like... -- EDGEMAN 01/21/2020 08:19AM

Oil filters are another favorite ** -- typed by ben 01/21/2020 11:03AM

IMO when you really get down to it technique is most important -- typed by ben 01/20/2020 9:42PM

Common math & a basic grasp will go far, -- thankbud 01/20/2020 11:10PM

Plus, the more important part of a torque wrench is that -- HokieSignGuy 01/20/2020 10:11PM

I just want to get in the ball park, and keep it there. -- EDGEMAN 01/21/2020 08:27AM

Have you ever asked to see calibration certificates at a car repair shop? -- Hokie360 01/20/2020 9:32PM

I wonder how often a "typical shop" actually uses a torque wrench. -- EDGEMAN 01/21/2020 12:14PM

I doubt their wrenches ever need calibrating... -- MP4VT2004 01/20/2020 9:37PM

Have you ever seen the "torque sticks" shops use? -- EDGEMAN 01/20/2020 9:38PM

Haha, I have not. Sounds interesting... ** -- MP4VT2004 01/20/2020 9:41PM

Search "torque sticks" on Amazon & you'll see them ** -- EDGEMAN 01/20/2020 10:15PM

I prefer to be better than your typical car repair shop ** -- EDGEMAN 01/20/2020 9:35PM

Have you asked what their typical calibration schedule is? ** -- Hokie360 01/20/2020 9:47PM

One torque wrench in your lifetime is enough, unless you need NASA -- vt_mughal 01/20/2020 9:32PM

Unless you are emotionally attached, i'd buy a new one in tolerance ** -- FlintMS 01/20/2020 9:24PM

The Precision Instruments torque wrench appears to be similar to... -- EDGEMAN 01/20/2020 9:29PM