I think a better question is why do you want to build a table top 1/2 thick

I think you will regret going that thin.

But yes, a Kreg jig will go to 1/2. Make sure you get the right length screws, though. The jig is adjustable, but different thickness material needs a different length screw.

In response to this post by EDGEMAN

Posted: 02/26/2019 at 5:35PM

Anyone have a Kreg jig? Want to build a table top, and curious how thin... -- EDGEMAN 02/26/2019 1:06PM

I think a better question is why do you want to build a table top 1/2 thick -- Tafkam Hokie 02/26/2019 5:35PM

My thought was to try to keep it as light as possible, but I'm not... -- EDGEMAN 02/27/2019 09:52AM

I suggest real joinery -- VTSnake 02/26/2019 2:48PM

I've seen tests were pocket hole joints are stronger than any other kind -- Tafkam Hokie 02/26/2019 5:39PM

I do. Theoretically you can go down to 1/2" but -- Tombo 02/26/2019 2:22PM

Agry. Half-inch seems awful thin. ** -- 48zip 02/26/2019 2:43PM

I have a K4 and I'm pretty sure it goes down to 1/2". ** -- No Clue 02/26/2019 1:38PM

1/2" apparently ** -- vtbones 02/26/2019 1:38PM

I think a better question is why do you want to build a table top 1/2 thick

Insert a Link

Tech Sideline is Presented By:

Our Sponsors