All Hokie, All the Time. Period. Presented by

The Lounge Board

vt90

Joined: 12/12/1998 Posts: 44906
Likes: 24266


Drill holes through the top of the stump and then drill some diagnonally ..


down so that there is an intersection between the holes. I would use at least a 1" boring bit for the holes. Then you fill the holes with kerosene and let it soak in for an hour or two. Repeat. Then fill it with kerosene a third time and fire it up.

I dug down as far as I could around the stump and there is already a 5 foot radius of dirt/mud around the stump so I don't really have to worry about embers. The problem is that it will burn for 45-50 minutes and then go out and I have to add more kerosene and go again. It is a very slow process. I probably have the stump down to about 75% of the original size so I am going to take the faster approach this weekend.

(In response to this post by BG Hokie)

Posted: 09/14/2020 at 11:57AM



+0

Insert a Link

Enter the title of the link here:


Enter the full web address of the link here -- include the "http://" part:


Current Thread:
  Is this a euphemism? ** -- bigbadbird 09/14/2020 12:09PM
  Shun ** -- bigbadbird 09/14/2020 1:58PM
  ...here you go... -- chumley 09/14/2020 2:01PM
  Maybe throw some fertilizer in there too? -- Hokie360 09/14/2020 11:48AM
  This drill should work quite well... -- Major Kong 09/14/2020 11:48AM
  Hey y'all...... watch this! ** -- turkeywinghokie 09/14/2020 11:46AM
  Any marshmallows to be roasted? ** -- PhotoHokieNC 09/14/2020 11:41AM

Tech Sideline is Presented By:

Our Sponsors

vm307